B+W 093 IR 830NM 77 UNCOATED F-PRO

This B+W Infrared Filter blocks the entire visible spectrum, so to our eyes it looks completely opaque. Unlike the infrared filter described above, it makes pure infrared photographs possible without the visible red component. Its transmission only begins to exceed 1% at 800 nm, rising to 88% at 900 nm, and remains that high far beyond the upper limit of sensitization covered by infrared films. This filter is used less frequently in pictorial photography because of the dramatic loss of effective ISO. But in the scientific field, materials research and forensics, the limitation to a strictly infrared range is often important. The filter factor is very dependent on the illumination and on the characteristics of the film.

72526


4012240725267
Contacta con nosotros

Más información sobre el producto

The B+W 093 Infrared Filter blocks the entire visible spectrum and so to our eyes looks completely opaque. It makes pure infrared photography possible by eliminating the visible red component. Its transmission only begins to exceed 1% at 800 nm, rising to 88% at 900 nm, and remains that high far beyond the upper limit of sensitization covered by infrared films. This filter is used less frequently in pictorial photography because of the dramatic loss of effective ISO, but in the scientific field, materials research and forensics, the limitation to a strictly infrared range is often important. The filter factor is in the range of 20 to 40 but largely dependent on the illumination present and on the characteristics of IR film.

Uncoated Glass
Uncoated glass is usually found with special effects filters and acrylic filters, where coating is either an impossibility or would work against the effect the filter is trying to attain.

Mount
This filter uses our standard B+W F-Pro filter mount, which has a front accessory thread and is made of brass. Compared to the earlier standard mount introduced in 2001, the F-Pro mount has become thinner. Now it can be used with wide angle lenses, including most 24mm focal lengths on a full frame body, without vignetting. Another advantage of the F-Pro mount is it's modified retaining ring, which is no longer threaded in from the front, but holds the filter glass in place from the back. When removing a filter or lens hood that has been screwed on too tight to the filter, the retaining ring is not at risk of loosening.

NOTE: diopters are mounted in the older mount due to glass thickness.

Características
Tamaño de filtro7.7 cm
Tipo de filtroInfrared camera filter
Color del productoBlack
Contenido del embalaje
Cantidad por paquete1 pc(s)
Información adicional:
Garantía2 años
*La infomación de los productos arriba indicada es provista por Icecat. EET Europarts no es responsable de los errores que pudieran contener
Añadir a favoritos
Borrar
Eliminar de la lista
Visitado recientemente
Has visitado recientemente la página
Artículo favorito
El producto está en tu lista de productos favoritos
Notificarme stock
Recibe un email cuando el producto esté disponible y en stock
de descuento
Descuento realizado en base a su precio de lista